Ticket #724: dmesg

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.29-0.258.2.3.rc8.git2.fc11.i586 (mockbuild@x86-3.fedora.phx.redhat.com) (gcc version 4.4.0 20090323 (Red Hat 4.4.0-0.29) (GCC) ) #1 SMP Tue Mar 24 18:37:23 EDT 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
DMI 2.5 present.
last_pfn = 0x1fff0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
CPU MTRRs all blank - virtualized system.
kernel direct mapping tables up to 1fff0000 @ 7000-d000
Using x86 segment limits to approximate NX protection
RAMDISK: 1fb6a000 - 1ffeee82
ACPI: RSDP 000E0000, 0024 (r2 VBOX  )
ACPI: XSDT 1FFF0030, 002C (r1 VBOX   VBOXXSDT        1 ASL        61)
ACPI: FACP 1FFF0060, 00F4 (r4 VBOX   VBOXFACP        1 ASL        61)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 1FFF01A0, 18A9 (r1 VBOX   VBOXBIOS        2 INTL 20050309)
ACPI: FACS 1FFF0160, 0040
0MB HIGHMEM available.
511MB LOWMEM available.
  mapped low ram: 0 - 1fff0000
  low ram: 00000000 - 1fff0000
  bootmap 00002000 - 00006000
(9 early reservations) ==> bootmem [0000000000 - 001fff0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000400000 - 0000fd5bac]    TEXT DATA BSS ==> [0000400000 - 0000fd5bac]
  #4 [001fb6a000 - 001ffeee82]          RAMDISK ==> [001fb6a000 - 001ffeee82]
  #5 [0000fd6000 - 0000fdb000]    INIT_PG_TABLE ==> [0000fd6000 - 0000fdb000]
  #6 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
  #8 [0000002000 - 0000006000]          BOOTMAP ==> [0000002000 - 0000006000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x0001fff0
  HighMem  0x0001fff0 -> 0x0001fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0001fff0
On node 0 totalpages: 130959
free_area_init_node: node 0, pgdat c0897400, node_mem_map c1000000
  DMA zone: 60 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3939 pages, LIFO batch:0
  Normal zone: 1860 pages used for memmap
  Normal zone: 125100 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x4008
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Found and enabled local APIC!
nr_irqs_gsi: 16
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 20000000:dffc0000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Allocating 1351680 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129039
Kernel command line: initrd=initrd0.img root=UUID=f6696cba-73c0-4b5a-b25f-7773c8824789 rootfstype=ext2 rw liveimg overlay=UUID=f6696cba-73c0-4b5a-b25f-7773c8824789 quiet  rhgb  BOOT_IMAGE=vmlinuz0 
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0a9d000 soft=c0a7d000
PID hash table entries: 2048 (order: 11, 8192 bytes)
TSC: Unable to calibrate against PIT
TSC: using PMTIMER reference calibration
Detected 2166.932 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:  8
... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        8191
... CLASSHASH_SIZE:          4096
... MAX_LOCKDEP_ENTRIES:     8192
... MAX_LOCKDEP_CHAINS:      16384
... CHAINHASH_SIZE:          8192
 memory used by lock dependency info: 2591 kB
 per task-struct memory footprint: 1920 bytes
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
allocated 2621120 bytes of page_cgroup
please try cgroup_disable=memory option if you don't want
Memory: 494828k/524224k available (3021k kernel code, 28852k reserved, 1921k data, 1672k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xe07f0000 - 0xff3fe000   ( 492 MB)
    lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
      .init : 0xc08d8000 - 0xc0a7a000   (1672 kB)
      .data : 0xc06f37ca - 0xc08d3df0   (1921 kB)
      .text : 0xc0400000 - 0xc06f37ca   (3021 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 4333.86 BogoMIPS (lpj=2166932)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
ACPI: Core revision 20081204
ACPI: setting ELCR to 0200 (from 0e20)
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 17494 entries in 69 pages
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (4333.86 BogoMIPS).
sizeof(vma)=84 bytes
sizeof(page)=60 bytes
sizeof(inode)=648 bytes
sizeof(dentry)=164 bytes
sizeof(ext3inode)=916 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=184 bytes
sizeof(task_struct)=5308 bytes
CPU0 attaching NULL sched-domain.
khelper used greatest stack depth: 2972 bytes left
net_namespace: 1240 bytes
Booting paravirtualized kernel on bare hardware
regulator: core version 0.5
Time: 11:34:38  Date: 04/08/09
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfc070, last bus=0
PCI: Using configuration type 1 for base access
khelper used greatest stack depth: 2876 bytes left
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.1: reg 20 io port: [0xc000-0xc00f]
pci 0000:00:02.0: reg 10 32bit mmio: [0xe0000000-0xe0ffffff]
pci 0000:00:03.0: reg 10 32bit mmio: [0xf0000000-0xf001ffff]
pci 0000:00:03.0: reg 18 io port: [0xc010-0xc017]
pci 0000:00:04.0: reg 10 io port: [0xc020-0xc03f]
pci 0000:00:04.0: reg 14 32bit mmio: [0xf0400000-0xf07fffff]
pci 0000:00:04.0: reg 18 32bit mmio: [0xf0800000-0xf0803fff]
pci 0000:00:05.0: reg 10 io port: [0xc100-0xc1ff]
pci 0000:00:05.0: reg 14 io port: [0xc200-0xc23f]
pci 0000:00:06.0: reg 10 32bit mmio: [0xf0804000-0xf0804fff]
pci 0000:00:0b.0: reg 10 32bit mmio: [0xf0805000-0xf0805fff]
pci 0000:00:0d.0: reg 10 io port: [0xc240-0xc247]
pci 0000:00:0d.0: reg 18 io port: [0xc250-0xc257]
pci 0000:00:0d.0: reg 20 io port: [0xc260-0xc26f]
pci 0000:00:0d.0: reg 24 32bit mmio: [0xf0806000-0xf0807fff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5 9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 *10 11)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
DMA-API: preallocated 8192 debug entries
DMA-API: debugging enabled by kernel config
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 6 devices
ACPI: ACPI bus type pnp unregistered
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 7, 655360 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
 it is
Freeing initrd memory: 4627k freed
platform rtc_cmos: registered platform RTC device (no PNP device found)
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1239190472.989:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
khelper used greatest stack depth: 2780 bytes left
khelper used greatest stack depth: 2724 bytes left
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 975
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ACPI: AC Adapter [AC] (on-line)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (FF) as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button (FF) [SLPF]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:0d.0: version 3.0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ahci 0000:00:0d.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:0d.0: flags: 64bit ncq ilck stag only 
scsi0 : ahci
ata1: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 9
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata1.00: 4194304 sectors, multi 128: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      VBOX HARDDISK    1.0  PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 4194304 512-byte hardware sectors: (2.14 GB/2.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 4194304 512-byte hardware sectors: (2.14 GB/2.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata_piix 0000:00:01.1: version 2.12
scsi1 : ata_piix
scsi2 : ata_piix
ata2: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
ata3: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
ata3.00: configured for UDMA/33
scsi 2:0:0:0: CD-ROM            VBOX     CD-ROM           1.0  PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ehci_hcd 0000:00:0b.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:0b.0: EHCI Host Controller
ehci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.0: irq 11, io mem 0xf0805000
ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29-0.258.2.3.rc8.git2.fc11.i586 ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ohci_hcd 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:06.0: OHCI Host Controller
ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:06.0: irq 5, io mem 0xf0804000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.29-0.258.2.3.rc8.git2.fc11.i586 ohci_hcd
usb usb2: SerialNumber: 0000:00:06.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
psmouse serio1: ID: 10 00 64<6>rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (8191 buckets, 32764 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
IO APIC resources could be not be allocated.
Using IPI No-Shortcut mode
registered taskstats version 1
  Magic number: 5:781:579
pci_bus 0000:00: hash matches
Freeing unused kernel memory: 1672k freed
Write protecting the kernel read-only data: 1448k
mknod used greatest stack depth: 2596 bytes left
mkdir used greatest stack depth: 2576 bytes left
mknod used greatest stack depth: 2544 bytes left
mknod used greatest stack depth: 2528 bytes left
plymouthd used greatest stack depth: 2468 bytes left
modprobe used greatest stack depth: 2456 bytes left
udev: starting version 139
modprobe used greatest stack depth: 2340 bytes left
vol_id used greatest stack depth: 1932 bytes left
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
squashfs: version 4.0 (2009/01/31) Phillip Lougher
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
type=1404 audit(1239190487.503:2): selinux=0 auid=4294967295 ses=4294967295
sh used greatest stack depth: 1828 bytes left
cat used greatest stack depth: 1676 bytes left
awk used greatest stack depth: 1520 bytes left
rm used greatest stack depth: 1416 bytes left
udev: starting version 139
parport_pc 00:05: reported by Plug and Play ACPI
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
e1000: 0000:00:03.0: e1000_probe: (PCI:33MHz:32-bit) 08:00:27:96:b7:d4
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
Intel ICH 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
ALSA sound/core/control.c:232: Control name 'Sigmatel Surround Phase Inversion Playback Switch' truncated to 'Sigmatel Surround Phase Inversion Playback '
intel8x0_measure_ac97_clock: measured 51388 usecs
intel8x0: measured clock 140091 rejected
intel8x0: clocking to 48000
input: PC Speaker as /devices/platform/pcspkr/input/input5
ppdev: user-space parallel port driver
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal